DW Series Floor Scales

The DW is a multi-purpose low profile scale allowing wheeled bins and drums to be easily pushed on and off.

  • Available in both mild steel and stainless
  • Deck Size: 30” x 30”
  • Capacity: 1,000 lb
  • Weighing surface is only 1.5” off the ground
  • 6” ramps provide the most compact foot print of any Drum Scale on the market
  • Live side rails provide access to place larger items for weighing
  • NTEP and FM approved
  • Optional indicator column and wheel kit are available
Category:

Description

General

The Drum Weigher is a multi-purpose low profile scale allowing wheeled bins and drums to be easily pushed on and off while being strong enough to support pallets loaded from the side. It was designed to operate under some of the most intense and demanding weighing requirements – remaining strong and rugged while providing fast, accurate readings at all times. The Drum Weigher’s durability is reinforced by six steel channels which are 3 ¼” wide supporting the 30″x30″ weighing surface.

Low profile design – With a weighing surface that is only 1.5 inches off the ground, the Drum Weigher allows operators to safely and effortlessly push loaded carts up onto the scale. The strong, smooth surfaced rails can support the scale if loaded from the side with a forklift truck. The increased height allows pallets/silages to be placed on the side rails and still allows easy access for the forklift to enter and easily retract.

Exceptional accuracy – The Drum Weigher includes the revolutionary Weigh Bar® designed to exceed the accuracy levels of a traditional load cell. The Weigh Bar is rugged, reliable and highly precise.

Material finish – The Drum Weigher is available in carbon and stainless steel. The 304 stainless steel scale provides excellent corrosion resistance to various chemicals and industrial atmospheres.

Serviceability – The Drum Weigher design provides easy access to the Weigh Bars and junction box for timely and routine maintenance. The removable cover plate grants easy access for calibration and service.

Inherent protection – The junction card enclosure is welded into the deck frame providing protection for sensitive components and additional strength to the frame. The Weigh Bar cables entering the box are protected by watertight hubs.

Side rails – The side rails on the LP provide a two way access for loading. Larger sized objects can be placed on the side rails which also serve as part of the weighing surface.

Paint finish – The hard wearing light blue powder coating gives extra added protection to the scale when used in an indoor or outdoor application.

Axle loading – The Drum Weigher has a 50% axle load rating.

Specifications

Finish (Carbon steel): 2-3 mil layer of high grade powder paint finish.
Weight sensors: Four Weigh Bars
Weigh Bar capacity: 500 lbs each
Weigh Bar output: 1 mv/v at capacity
Overload protection: 200%
End loading: 100% Accuracy: 5,000 division, ±1 division
Resolution: 10,000 divisions, in non legal-for-trade applications Temperature: 14º to 104ºF (-10º to 40ºC)
Agencies: NTEP Certificate of Conformance #93-130 Factory Mutual approved Weigh Bars and junction box. Add an Avery Weigh-Tronix GSE 350IS or 355IS Indicator for complete Factory Mutual approval, reference Control Drawing AWT35-500389.
Canadian Weights and Measures
Interface cable: 25 ft cable included or 6 ft when indicator column is included
Shipping weight: Carbon steel: 240 lb (108 kg) Stainless steel: 250 lb (113 kg)

DW Series

Drum Weigher – Two-Way Access Scale – Less Indicator
Legal-for-Trade CC 93-130 Class III 5,000 Divisions

The DW Series is the high grade powder paint finish carbon steel version of the Drum Weigher Scale. The live weighing area is 30″ X 30″ and has a tread plate surface for improved safety and durability. The side rails are live and useful in weighing products that extend beyond the weighing area. The standard product includes two access ramps and a 25′ interface cable or a 6′ interface cable when ordered with an indicator post. The highest elevation of the weighing platform is 1½” from ground surface. A gasketed junction box sums the four Weigh Bar® weight sensors and provides a quick interface cable termination. The Drum Weigher is Factory Mutual System approved with the GSE 350 I.S. or GSE 355 I.S. indicator. It has 100% end loading capability.

Drum Weigher

DWS Series (stainless steel) Two-Way Access Scale – Less Indicator
Legal-for-Trade CC 93-130 Class III 5,000 Divisions

The DWS Series is the stainless steel version of the Drum Weigher Scale. The live weighing area is 30″ X 30″ and has a tread plate surface for improved safety and durability. The side rails are live and useful in weighing products that extend beyond the weighing area. The standard product includes two access ramps and a 25′ interface cable or a 6′ interface cable when ordered with an indicator post. The highest elevation of the weighing platform is 1½” from ground surface. A gasketed junction box sums the four Weigh Bar weight sensors and provides a quick interface cable termination. The Drum Weigher is Factory Mutual System approved with the GSE 350 I.S. or GSE 355 I.S. indicator. It has 100% end loading capability.

Download Spec Sheet

Download

Go to Top